TAKAGI T-K3-PRO 199,000 BTU LP GAS TANKLESS WATER HEATER

Note: Heater Only. Accessories are additional.

The T-K3-Pro is ideal for light-commercial applications including small restaurants and beauty salons.

Utilizing HRS35 copper alloy for the heat exchanger tubing, the T-K3-Pro is also suited for heavier-residential usages such as space-heating and domestic recirculation systems.

In addition to the added durability, the T-K3-Pro incorporates all the features of the popular T-K3 residential model. Natural Gas Input Min. 11,000 Btu Max. 199,000 Btu LPG Input Min. 11,000 Btu Max. 199,000 Btu Gas Connection 3/4" Water Connection 3/4" Natural Gas Pressure Inlet Min 5.0" W.C. 10.5" W.C. LP Gas Pressure Inlet Min 8.0" W.C. 13.5" W.C. Weight 40 lbs. Dimensions 25.3" x 24.8" x 11.8" Ignition Electronic Ignition Electrical Supply AC 120 V Water Pressure Max. 150 psi Max. 150 psi

TM-RE30 Temperature Remote Control The TM-RE30 Temperature Remote Controller allows the output temperature to be adjusted beyond the factory settings, and works as a diagnostic tool for error codes.

TK-TV13 Wall Ventilation Terminator for Direct Vent The TK-TV13 Wall vent terminator is used where a tankless hot water unit will be vented through a wall.

TK-TV10 Direct Vent Conversion Kit The TK-TV10 direct vent conversion kit can be used to convert the tankless hot water unit from a conventional vent system to a direct vent (or sealed combustion) system.

TK-TV04 Outdoor Ventilator Cap The TK-TV04 vent cap kit is installed on the top of the unit to allow outside installation of the tankless unit.

TK-RB01 Recess Box The TK-RB01 Recess box completely houses the tankless unit and allows the installation to be entirely recessed into a wall. The recess box measures just over 14 inches wide to easily fit in-between studs.

TK-PC01 Pipe Cover The TK-PC01 Pipe cover is designed to be attached directly to the bottom side of the unit to provide a cover for the pipe connection entry.

TK-KPWH4 Cap Wall Thimble With Hood The TK-KPWH4 T-Vent wall thimble with hood termination is used when venting out through the wall and are compatible with the T-Vent pipe system.

TK-IV-01 Isolation Valves & Pressure Relief Valve Isolation valves relieve pressure in the tank and protects it against damage.

TK-BF01 Exhaust Backflow Prevention Kit The TK-BF01 prevents cold air from entering the vent and causing heat exchanger to freeze.